A Wet Basement is not a Minor Convenience – Stop Basement Seepage with Basement Tanking Services

Water pushing through below ground contains salt elements in it, and it can break down concrete, corrode steel reinforcement, and create damp conditions – a place for mold to build up. If left untreated, it can compromise the structural integrity of the entire building and the structure above it. 

Two Main Approaches of Basement Tanking Helping You Secure Your Place from Mold

Unlike surface treatments on roofs or terraces, basement tanking works against hydrostatic pressure, the constant push of groundwater and moisture from the outside against your walls and floor.

There are two main approaches for seepage solution, and the right one depends on your situation:

• Internal Tanking (negative side waterproofing): 

Waterproof coating with cementitious or slurry material is applied to the interior walls and floor. This is the option to use when you cannot dig up the outside.

• External Tanking (positive-side waterproofing): 

Membranes are applied externally to the structure during construction or major renovation. This keeps the water away from the wall and is the more complete solution when access is possible.

How do You Spot the Problem that Indicates the Need of Basement Waterproofing?

Many property owners ignore the early signs of trouble until the damage is extensive. Search for:

• Damp patches or white mineral deposits (efflorescence) on the walls of a basement.
• Paint or plaster that keeps falling off.
• Dry, but you could smell damp and musty.
• Visible cracks, moisture seeping out.
• Puddles or wet floor after rain or watering.
• Rust stains on walls where steel reinforcement is near the surface.

Any of these means water is already getting in. There are many signs that the problem is moving forward. The sooner the tanking is done, the less structural damage and water leakage repair there is to do. 

Basement Tanking Process That Makes Your Basements Last Longer 

• Full Site Inspection

We inspect the walls, floor, joints, pipe penetrations, and any existing waterproofing. We check drainage conditions and establish where and from which direction water is coming in.

• Surface Preparation

Strip off loose material, old coatings, and contaminated concrete. Cracks and joints are opened up, cleaned, and filled with suitable repair mortars before any waterproofing material is applied.

• Tanking Application

Depending on your application, we use cementitious slurry coatings, crystalline waterproofing compounds, or sheet membranes, all applied to the proper thickness and coverage for your particular exposure conditions.

• Drainage and Finishing (if needed)

We include drainage channels and sump systems in high-water-table conditions to manage residual moisture and prevent it from building up pressure.

• Warranty & Inspection Documents

We check everything before we go. You receive a written document detailing the treatment applied and the warranty conditions for it.

Why Choose One Roof for Basement Tanking?

• We diagnose before we prescribe. 
• We use materials rated for Pakistan’s groundwater conditions. 
• Permanent fix, not a patch job. 
• Written warranty on every project. 
• We work on active buildings. 

Request a Free Basement Inspection

If your basement is damp or wet, or you’re starting to notice some seepage, it’s best to take action now. Waiting could lead to serious structural issues and more costly repairs down the line. 

Give One Roof Waterproofing, the best waterproofing company, a call for an expert inspection.

Call Now!